Home >  Products  > Ex Lighting Products

BPY Explosion Proof Energy-Efficient & Maintenance Free Led light


Pieces suitable for explosive gas environment 1 zone and 2 zone,

This product in Hazardous:21,22,

Pieces suitable for IIA, IIB, IIC explosive gas environment,

Should apply to the temperature group for T1~T6 environment;

T8 LED tubes as light source.

Technician specifications

Ex rating:Exd II BT6 Gb, Exd II CT6 Gb, Extd A21 T A ,T6

Rated voltage:AC220V 50-60Hz

Lamp options:Selection Table

protection grade:IP65、IP66* 

Corrosion-proof grade:WF1 、WF2* 

Inlet thread:G1/2”

Cable outer dia.:φ6.5mm~φ10mm

Terminal block: ≤1.5mm2 reliable wire connection  

Battery charging time:≤24h

Emergency start time:≤0.3s

Emergency lighting duration:≥90min

Executive standard:GB3836.1, GB3836.2、GB12476.1、IEC60079-0、IEC60079-1、IEC61241-1、EN60079-0、EN60079-1、EN61241-1

BPY Explosion Proof Energy-Efficient


◇Pieces suitable for explosive gas environment 1 zone and 2 zone;

◇Pieces suitable for IIA, IIB, IIC explossive gas environment;

◇This product in Hazardous:zone21, zone22;

◇Should apply to the temperature gruop for T1~T6 environment;

◇T8 Bi-pin LED Tube as lighting sources;

◇Designed for petroleum exploitation, refinery, storage, chemistry, medicine;

military and military facilities etc. sites with potential explosive atmosphere;

Techniccl parameter

◇Meet a criterion:GB3836.1, GB3836.2, GB12476.1, IEC60079-0, IEC60079-1, IEC61241-1, EN60079-0、EN60079-1, EN61241-1

◇Explosion-proof mark:Exd II BT6 Gb, Exd II CT6 Gb, Extd A21 TA,T6

◇Rated voltage:AC220V

◇Lamp options:Selection Table

◇protection  grade: IP65, IP66*

◇Explosion-proof  grade:WF1 WF2*

◇Inlet thread:G1/ ''

◇Cable outer dia.:φ6mm~φ10mm

◇Battery charging time:≤24h

◇Emergency start time:≤0.3s

◇Emergency lighting duration:≥90min

BPY Explosion Proof Energy-Efficient


◇Enclosure is die casted of aluminium alloy, high voltage electrostatic powder coated after shot blasted,

◇High strength toughened glass cover,

◇Exposed fasteners are of stainless steel,

◇Lighting fitting with grids to adjust lighting effect and reduce the glare.

◇Modular plug structure design, only need disconnect end cover draw out core to change tubes,

◇For fittings with emergency unit, it will automatically shaft to emergency lighting when power circuit failed,

◇Special over charging and over discharging protection circuit inside the emergency unit,

◇Screw connection type, for easy installation and maintenance,

◇Power factor can be over 0.95,

◇Steel conduit or cable wirings.

BPY Explosion Proof Energy-Efficient

BPY Explosion Proof Energy-EfficientBPY Explosion Proof Energy-EfficientBPY Explosion Proof Energy-Efficient

Accel Technology