Applications:
Pieces suitable for explosive gas environment 1 zone and 2 zone,
This product in Hazardous:21,22,
Pieces suitable for IIA, IIB, IIC explosive gas environment,
Should apply to the temperature group for T1~T5 environment;
T8 LED tubes as light source.
Technician specifications
Ex rating:Exedmb II CT5 Gb, Extd A21 T A ,T5
Rated voltage：AC220V
Lamp options: T10 Single-pin instant fluorescent tube(1×20W, 2×20W,1×40W, 2×40W), Fa6 lamp holder inductive ballast
T8 Bi-pin fluorescent tube (1×18W, 2×18W, 1×36W,2×36W)G13 lamp holder The electronic ballast
T5 and T8 LED tube(1×9W, 2×9W, 1×18W, 2×18W)
protection grade：IP65
Corrosion-proof grade：WF2
Inlet thread：2-m25×1.5
Cable outer dia.:φ8mm～φ14mm
Battery charging time:≤6h
Emergency start time:≤0.3s
Emergency lighting duration:≥90min
Executive standard:GB3836.1、GB3836.2、GB3836.3、GB3836.9、GB12476.1、IEC60079-0、IEC60079-1、IEC60079-7、IEC60079-18、IEC61241-1、EN60079-0、EN60079-1、EN60079-7、EN60079-18.
Applications
Pieces suitable for explosive gas environment 1 zone and 2 zone,
Pieces suitable for IIA, IIB, IIC explossive gas environment, This product in Hazardous:21,22,
Should apply to the temperature gruop for T1~T5 environment;
Designed for petroleum exploitation, refinery, storage, chemistry, medicine, military and military facilities etc. sites with potential explosive atmosphere.
Techniccl parameters
Meet a criterion:GB3836.1, GB3836.2, GB3836.3, GB3836.9, GB12476.1, IEC60079-0, IEC60079-1, IEC60079-7, IEC60079-18, IEC61241-1-1, EN60079-0, EN60079-1, EN60079-7, EN60079-18, EN61241-1-1
Explosion-proof mark:Exedmb II CT5 Gb, Extd A21 TA,T5
Rated voltage:AC220V
Lampoptions:T10 Single-pin instant fluorescent tube(1×20W, 2×20W,
1×40W, 2×40W), Fa6 lamp holder inductive ballast
T8 Bi-pin fluorescent tube (1×18W, 2×18W, 1×36W,
2×36W)G13 lamp holder The electronic ballast
T5 and T8 LED tube(1×9W, 2×9W, 1×18W, 2×18W),
protection grade:IP65
Explosion-proof grade:WF2
Inlet thread:2-m25×1.5
Cable outer dia.:φ8mm～φ14mm Battery charging time:≤6h Emergency start time:≤0.3s Emergency lighting duration:≥90min
Features
◇Enclosure is molded of SMC glass fibre reinforced polyester (GRP) with benefits of high strength, impact resistance and corrosion resistance.
◇Lampshade is injected of polycarbonate with benefits of high light transmittance and impact resistance.
◇Labyrinth seal structure with strong water resistance and dust resistance.
◇Name brand fluorescent tube with long service life and high light efficiency.
◇Exclusive explosion proof ballast.
◇With convenient opening method, turn opening mechanism as per indication
to open cover.
◇Built-in limit switch, de-energizing when open cover to assure the safe operation and maintenance.
◇Lighting fixutre with emergency unit will be automatically shafted to emergency lighting status when normal power failure.
◇Special designed over charging, over discharging circuit inside emergency unit.
◇Steel conduit or cable wirings.
Note
◇lamps and lanterns has factory configuration light source, the user access power can use;
◇Take emergency unit, installation only ceiling type and bo o m type applicable;
◇It is default pendant type is side entry type. Please indicate when need upwards entry;
Example: To order BYS lamp, Pendant type-Aspirant line, with two 28W fluorescent tubes, with emergency unit, the order code is BYS-2×28g2J.
